Accessories
Many of our accessories are specific to a product or group of products. Link to the products from each of the accessories below, or navigate to a specific product page to see all the accessories that fit that product.
Wood Stove Accessories
Heat Shields, Lincoln
Rear Heat Shield 90-68601
Side Heat Shield 90-68605
The rear heat shield clips onto the back of the stove. The side heat shield clips onto either the left side, right side, or both sides of the stove. Heat shields can be installed individually to reduce the required distance between the stove and the wall being shielded.
Rear Heat Shield
90-68210
The rear heat shield screws to the back of the stove, reducing the required distance between the stove and the wall behind it. The heat shield also provides attachment for the convection blower, sold separately.
Rear Heat Shield
90-68300
The rear heat shield screws to the back of the stove, reducing the required distance between the stove and the wall behind it. The heat shield also provides attachment for the convection blower, sold separately.
Convection Blower
90-57210
The convection blower moves air up and across the stove to circulate more heat into your room. A snap switch turns the blower on automatically. Adjust the rheostat to control the speed of the blower or turn it off.
Convection Blower w/ Rear Heat Shield
96-57400
The convection blower moves air up and across the stove to circulate more heat into your room. A snap switch turns the blower on automatically. Adjust the rheostat to control the speed of the blower or turn it off. The rear heat shield screws to the back of the stove, reducing the required distance between the stove and the wall behind it and channeling the air from the blower.
Convection Blower w/ Rear Heat Shield
96-57800
The convection blower moves air up and across the stove to circulate more heat into your room. A snap switch turns the blower on automatically. Adjust the rheostat to control the speed of the blower or turn it off. The rear heat shield screws to the back of the stove, reducing the required distance between the stove and the wall behind it, and channeling the air from the blower.
Rear Heat Shield
5968-011
The rear heat shield attaches to the back of the stove, reducing the required distance between the stove and the wall behind it. The heat shield also provides attachment for the convection blower, sold separately.
Convection Blower
96-57801
The convection blower moves air up and across the stove to circulate more heat into your room. A snap switch turns the blower on automatically. Adjust the rheostat to control the speed of the blower or turn it off.
Close Clearance Heat Shield
93-68600
The close clearance heat shield clips onto the built-in cast iron heat shield and covers the rear flue cap to reduce rear clearances with vertical pipe installations.
Convection Blower
93-57600
The Manchester includes a built-in cast iron rear heat shield. The convection blower mounts below the stove to blow air up inside the heat shield and across the top heat exchangers. A snap switch turns the blower on automatically. Adjust the rheostat to control the speed of the blower or turn it off.
Ash Pan
90-54240
Access the ash pan below the ash lip to remove ashes without shoveling though the front door. Shaker grates let ashes fall through to the ash scoop inside the ash pan. The ash pan bolts into the bottom of the firebox.
Outside Air Starter Kit, 3″
96-53400
Bring air into your stove from outside of your house to ensure proper combustion and keep more heat in your home. Recommended for newer well-sealed homes. 3″ ducting not included.
Outside Air Adapter, 3″
90-53300
Bring air into your stove from outside of your house to ensure proper combustion and keep more heat in your home. Recommended for newer well-sealed homes. 3″ ducting not included.
Outside Air Adapter
90-53220
Bring air into your stove from outside of your house to ensure proper combustion and keep more heat in your home. Recommended for newer well-sealed homes. 3″ ducting not included.
Outside Air Adapter
93-53500
Bring air into your stove from outside of your house to ensure proper combustion and keep more heat in your home. Recommended for newer well-sealed homes. 3″ ducting not included.
Outside Air Adapter
91-53712
Bring air into your stove from outside of your house to ensure proper combustion and keep more heat in your home. Recommended for newer well-sealed homes. 3″ ducting not included.
Outside Air Increaser, 3″ to 4″
90-53308
Use the increaser for longer outside air pipes to make sure enough fresh air is reaching your stove.
General Accessories
Soapstone Steamer
90-99112
Recommended for all wood burning stoves, the steamer adds moisture to the air to help balance the drying effects of a wood fire. Just fill the steamer pot with water and set it on your stove. They’re great for aromatherapy too. Simply add some essential oils or fragrant herbs to the water.
Leather Safety Gloves
90-99031
Durable and dependable, our leather safety gloves are thick and protective, with a soft inner lining. One size fits all.
Stove Top Thermometer
90-99120
Recommended for soapstone stoves, the stove top thermometer helps you keep your stove burning within the optimal temperature range for safe and efficient heating.
Draft Meter
90-99000
Recommended for wood stoves installations, the draft meter allows you to measure the draft in your chimney. Proper draft is necessary for clean and efficient wood burning.
Draft Inducing Flue Collar
90-99099
Recommended for installations with poor draft, the draw collar heats up your chimney to ensure a proper draft. Fits 6″ flue.
Finishes and Paint
Keep your stove or fireplace looking shiny and new.
Choose from matte black spray cans for cast iron parts, filler and touch-up paint to match enamel, charcoal spray cans for HASE steel products, and gas vent pipe paint to match your stove.
Wood Insert Accessories
Surround Base Caps
94-5970610/20
The surround caps are an aesthetic addition to the surround that continue the lines of the ash lip. Made of cast iron and finished to match the insert, the caps attach to the surround with magnets.
Surround Extension
94-5990010
The surround extension covers an additional 6 inches of space beyond the standard cast iron surround. It is made of extruded aluminum with a black finish and contoured to match the Clydesdale styling.
Steel Surround
94-5950110
The steel surround panel attaches to the back of the cast iron faceplate.
Surround Extension
94-5950010
The surround extension is installed between the cast iron faceplate and the steel surround, reducing the hearth depth required to install the fireplace insert.
Steel Surround
94-5960010
Steel surround, 3-piece assembly.
Surround Extension
94-5960110
The surround extension is installed between the cast iron faceplate and the steel surround, reducing the hearth depth required to install the fireplace insert.
Liner Hook-Up Starter Collar
94-67500
The Liner Hook-Up Starter Collar connects to your chimney liner before you install the insert in the fireplace. It can then be easily and safely secured to the insert after the insert is placed in the fireplace, making the whole installation process easier.
Outside Air Adapter
94-53500
Connect an outside air source directly to your fireplace insert. Recommended for air tight homes. 5 inch flexible pipe not included.
Offset Liner Adapter
5700-007
The offset adapter moves the connection point between the insert and the chimney liner up to 6 inches back.
Mantel Shield
94-79700
The mantel shield attaches to bottom of a combustible mantel to reduce clearances per NFPA 211 standards. Attach to the mantel with screws and ceramic spacers. 48 inches wide. It can be cut to fit specific installations.
Fire Screen
94-69110
The Fire Screen allows the user to burn the fireplace with the door open to enjoy the direct fire.
Fire Screen
94-69500
The Fire Screen allows the user to burn the fireplace with the door open to enjoy the direct fire.
Wood ZC Fireplace Accessories
Hot Air Distribution Kit
94-99100
Two hot air vents are piped from the fireplace and use the built-in fireplace blower to move hot air into the room. The vents can be placed independently in other rooms if desired.
Hot Air Distribution Kit, Modern
94-99110
One linear vent is piped from the fireplace and uses the built-in fireplace blower to move hot air into the room. The vent must be installed directly above the fireplace.
Forced Hot Air Kit
94-57110
The forced hot air kit uses a blower to move hot air from the fireplace to other areas of the house. It can be connected to either side of the fireplace. Insulated pipe with a maximum run of 50 feet is recommended.
Hot Air Circulation Kit
94-99200
The kit includes two vents which encourage air movement through the wall cavity where the fireplace is installed, moving warm air into the room. The vents allow the flow of ambient air. They are not connected to the fireplace.
Forced Hot Air Kit
94-57200
The forced hot air kit uses a blower to move hot air from the fireplace to other areas of the house. It can be connected to either side of the fireplace. Insulated pipe with a maximum run of 50 feet is recommended.
Gas Stove Accessories
Convection Blower
93-57020
The convection blower mounts below the stove to blow air up through the stove body and across the top heat exchanger, moving more heat into your room. A snap switch turns the blower on automatically. Adjust the rheostat to control the speed of the blower or turn it off.
Convection Blower
93-57230
The convection blower mounts below the stove to blow air up through the stove body and across the top heat exchanger, moving more heat into your room. A snap switch turns the blower on automatically. Adjust the rheostat to control the speed of the blower or turn it off.
Remote Control Kit
90-56914
This remote allows the user to manually turn the unit on and off and also has a thermostat mode which controls the on / off operation of the unit automatically. The system is battery operated and controls the stove by RF (radio frequency) signal.
Wall Touch Pad
7000-260
The wall touch pad and be installed on a wall to turn your stove on/off and adjust the flame height. This accessory works with all of our stoves that use the Maxitrol GV60 ignition system.
